J54 RT Mining Spec Conti Suit

Description Dromex® J54 high visibility jacket and pants suit is a lightweight work garment designed to provide the user with comfort, especially when working in hot and humid environments. The Dromex® J54 pants and jacket is approved to the latest SANS 434 and SANS 1387 specifications and has the SABS permit marking. The 100% cotton satin weave finish and natural fibre construction makes this garment breathable and durable This garment is available in 3 different colours, yellow, royal blue and red, which consists of the following: Jacket features: • Collared jacket with internal hanger loop. • Concealed YKK brass zip closure. • 2 Open waist pockets and 1 left breast mitred pocket with concealed press stud closure and Dromex® sidewinder label. • Seams with triple needle topstitching for added durability. • Side slits for better fit over waist. • High visibility lime green silver reflective tape on arms, breast and rear of jacket (cross pattern) for enhanced visibility when working in poor lighting environments. Pants features: • A concealed brass YKK zip with metal button closure at waist. • Two front swing pockets and a rear mitred open pocket with Dromex® sidewinder label and a ruler pocket on right leg. • Seams with triple needle topstitching for added durability. • Inner elasticated waist for optimum fit and flexibility with 7 belt loops. This garment is suitable for use in general work environments such as agriculture, mining, logistics, warehousing, maintenance and repairs. Special Instructions None of the materials or processes used in the manufacture of these products are known to be harmful to the wearer. The manufacturer has examined under the system for ensuring quality of production by means of monitoring and inspection. These cotton garments are designed to accommodate the basic safety requirements and standards for Personal Protective Equipment. The information contained herein is intended to assist the wearer in the selection of personal protective equipment. Actual conditions of use cannot be directly simulated in a test environment therefore it is the responsibility of the end user and not the manufacturer or supplier to determine the garment suitability for the intended use. This garment should be thoroughly inspected before use to ensure no damage is present. Should there be visible damage such as tears, it is recommended to replace the garment immediately. Specifications Style: Long sleeve jacket and pants suit. Fabric composition: 100% Cotton. Mass: 220gsm. Reflective: 50mm Lime with 19mm silver reflective tape. Compliance & Conformity • The J54 fabric is SANS 1387 approved (This part of SANS 1387 covers the definitions, basic requirements, requirements for packing, labelling, marking as well as inspection and testing of woven cotton and similar apparel fabrics that are suitable for use in the manufacture of clothing and covers covers 11 types of fabric with reference to workwear of J54 - Jean material with a 2/1 twill weave, 220g/m2 minimum. • Garments comply to the latest SANS 434 standard (This standard specifies requirements for cut, make and trim of two-piece work wear suits in a SANS 434 facility). This standard makes reference to the following relevant standards: SANS 1362 Sewing threads. SANS 1822 Slide fasteners. SANS 5278 Sewing stitches per unit length. SANS 10235 Fibre-content labelling of textiles and textile products. SANS 50471 High-visibility warning clothing for professional use.

• Brand: Dromex
• SKU: DW-J54-ANGYL