Product information and features: Material: Polyamide 6/6 Flammability self self-extinguishing. Smoothened rounded edges makes them easier to handle and safer to install. Bent round tip allows easier insertion through the head of the cable tie. Resistance to oil/mildew. Colour: Black, blue or clear Black cable ties are filled with carbon clack and are recommended for general outdoor use, as this gives a better resistance to ultra violet light. Halogen free. Technical Characteristics of Polymide 6/6 Humidity absorption: 2.5 % (in 50 %of relative humidity). Temperature range: Usage after installation : -40 degrees C +85 degrees C During installation : -10 degrees C +60 degrees C Maximum admissible point : +110 degrees C for a short time Melting point : +256 degrees C Limit oxygen index (LOI) : 27 % Dielectric strength : 50 000 volts/mm Resistance to external agents: Excellent resistance to bases, oils, greases, oil products, chlorate solvents. Limited resistance to all acids. No resistance to phenols. Sizes 543 mm x 12.5 mm x 2.3 mm Minimum Tensile Strength 140 kg 395 mm x 7.8 mm x 1.8 mm Minimum Tensile Strength 70 kg
Product information and features: MATERIAL: POLYMIDE 6/6 FLAMMABILITY SELF EXTINGUISHING. SMOOTHENED ROUNDED EDGES MAKES THEM EASIER TO HANDLE AND SAFER TO INSTALL. BENT ROUND TIP ALLOWS EASIER INSERTION THROUGH THE HEAD OF THE CABLE TIE. RESISTANCE TO OIL/MILDEW. COLOUR: BLACK, BLUE OR CLEAR BLACK CABLE TIES ARE FILLED WITH CARBON CLACK AND ARE RECOMMENDED FOR GENERAL OUTDOOR USE, AS THIS GIVES A BETTER RESISTANCE TO ULTRA VIOLET LIGHT. HALOGEN FREE. TECHNICAL CHARACTERISTICS OF POLYMIDE 6/6 HUMIDITY ABSORPTION: 2.5 % (IN 50 %OF RELATIVE HUMIDITY). TEMPERATURE RANGE: USAGE AFTER INSTALLATION: -40 DEGREES C +85 DEGREES C DURING INSTALLATION: -10 DEGREES C +60 DEGREES C MAXIMUM ADMISSIBLE POINT: +110 DEGREES C FOR A SHORT TIME MELTING POINT: +256 DEGREES C LIMIT OXYGEN INDEX (LOI) : 27 % DIELECTRIC STRENGTH: 50 000 VOLTS/MM RESISTANCE TO EXTERNAL AGENTS: EXCELLENT RESISTANCE TO BASES, OILS, GREASES, OIL PRODUCTS, CHLORATE SOLVENTS. LIMITED RESISTANCE TO ALL ACIDS. NO RESISTANCE TO PHENOLS. SIZES: 543 MM X 12.5 MM X 2.3 MM MINIMUM TENSILE STRENGTH 140 KG 395 MM X 7.8 MM X 1.8 MM MINIMUM TENSILE STRENGTH 70 KG
Product information and features. All parts are made from carbon steel with internal parts case hardened. Double 3 Tooth tumbler locking system. Double-link Reinforced Steel Swivel 19 Locking position on 3 mm thick ratchet. 12 Rivet Points (machine riveted) Handcuff cheeks – 2 mm thick per side. Handcuffs are nickel plated for reinforcing, scratch and wear resistant. Individually packed with 2 keys. 50 packets per box Weight per handcuff – 320 grams. Static diameter – 50 mm (cuff inside diameter). Static load approximately 1 500 N (pulling force). Total length of linked handcuff – 200 mm. open and 100 mm closed. Galvanized single locking keys.
Product information and features: All parts made from steel (Pickle in Oil) with internal parts case hardened. Double tumbler locking system. High tensile spring (56-58 HRC). Reinforced link handcuff. 13 Locking position on 3 mm thick ratchet. Handcuff cheeks – 2 mm thick per side. Handcuffs are electroplated. Individually packed with 2 keys. 50 packets per box Weight: 400 grams. Static diameter – 50 mm (cuff inside diameter). Static load approximately 1 500 N (pulling force). Total length of linked handcuff – 230 mm closed and 250 mm open 10 rivet points GALVANIZED SINGLE LOCKING KEYS (eco handcuffs).
PRODUCT INFORMATION AND FEATURES: ALL PARTS MADE FROM CARBON STEEL WITH INTERNAL PARTS CASE HARDENED. DOUBLE 3 TOOTH TUMBLER LOCKING SYSTEM. Chain link 1, 3 or 5 links (can be customised to longer length) 19 LOCKING POSITION ON 3 MM THICK RATCHET. 12 RIVET POINTS (MACHINE RIVETED) HANDCUFF CHEEKS – 2 MM THICK PER SIDE. HANDCUFFS ARE NICKEL PLATED FOR REINFORCING, SCRATCH AND WEAR RESISTANT. INDIVIDUALLY PACKED WITH 2 KEYS. 50 PACKETS PER BOX WEIGHT PER HANDCUFF – 320 GRAMS. STATIC DIAMETER – 50 MM (CUFF INSIDE DIAMETER). STATIC LOAD APPROXIMATELY 1 500 N (PULLING FORCE). GALVANIZED SINGLE LOCKING KEYS chain
PRODUCT INFORMATION AND FEATURES: ALL PARTS MADE FROM STEEL (PICKLE IN OIL) WITH INTERNAL PARTS CASE HARDENED. DOUBLE TUMBLER LOCKING SYSTEM. HIGH TENSILE SPRING (56-58 HRC). REINFORCED LINK HANDCUFF. 9 LOCKING POSITION ON 3.6 MM THICK RATCHET. HANDCUFF CHEEKS – 2.5 MM THICK PER SIDE. HANDCUFFS ARE NICKEL PLATED FOR REINFORCING, SCRATCH AND WEAR RESISTANT. INDIVIDUALLY PACKED WITH 2 KEYS. WEIGHT: 400 GRAMS. STATIC DIAMETER – 80 MM (CUFF INSIDE DIAMETER). STATIC LOAD APPROXIMATELY 1 500 N (PULLING FORCE). TOTAL LENGTH OF LINKED HANDCUFF – 330 MM 10 RIVET POINTS GALVANIZED SINGLE LOCKING KEYS Can be made with a chain in place of link
Product information and features: All parts made from steel (Pickle in Oil) with internal parts case hardened. Double tumbler locking system. Double Locking System Ratchet and Lock High tensile spring (56-58 HRC). 2 x Reinforced steel Links 4 mm thick 19 Locking position on 3 mm thick ratchet. Handcuff cheeks – 2 mm thick per side. Handcuffs are nickel plated for reinforcing, scratch and wear resistant. Individually packed with 2 keys. 50 packets per box Weight per handcuff – 320 grams. Static diameter – 50 mm (cuff inside diameter). Total length of linked handcuff – 200 mm 12 RIVET POINTS (MACHINE RIVETED) Static load 1500 n 2 x nickel plated double locking keys Security pin in keyhole
Product information and features: All parts made from steel (Pickle in Oil) with internal parts case hardened. Double tumbler locking system. High tensile spring (56-58 HRC). 13 Locking position on 3 mm thick ratchet. Handcuff cheeks – 2 mm thick per side. Individually packed with 2 keys. 50 packets per box. Weight handcuff – 300g Static diameter – 50 mm (cuff inside diameter). Static load approximately 1 500 N (pulling force). 10 RIVET POINTS (MACHINE RIVETED) Non fold-able.
Product information and features: Made of 600 / 600 d polyester 60mm wide double belt loop Clip on press button Etched with polyester stitching Can fit all fold – able handcuffs
Product information and features: ALL PARTS MADE FROM STEEL (PICKLE IN OIL) WITH INTERNAL PARTS CASE HARDENED. DOUBLE TUMBLER LOCKING SYSTEM. HIGH TENSILE SPRING (56-58 HRC). REINFORCED chain 250 mm long 9 LOCKING POSITION ON 3.6 MM THICK RATCHET. HANDCUFF CHEEKS – 2.5 MM THICK PER SIDE. HANDCUFFS ARE NICKEL PLATED FOR REINFORCING, SCRATCH AND WEAR RESISTANT. INDIVIDUALLY PACKED WITH 2 KEYS. WEIGHT: 500 GRAMS. STATIC DIAMETER – 80 MM (CUFF INSIDE DIAMETER). STATIC LOAD APPROXIMATELY 1 500 N (PULLING FORCE). TOTAL LENGTH OF chain legcuff 530 MM 10 RIVET POINTS GALVANIZED SINGLE LOCKING Keys
Product information and features: Leg-cuff and belly chain combo or handcuff and leg-cuff combo Various combinations on request by customer requirements.