300g/m2 100% D59 flame retardant and acid-resistant cotton twill elasticated back waist • five belt loops • two slanted front pockets • back pocket • right leg features ruler pocket Silver 50mm flame retardant reflective tape detail • triple needle top stitching • bar tacks at stress points SABS approved Manufactured in the SADC Region Rise per Size
Features (Jacket): Reinforced bar tacked seam & pressure points, flame retardent reflective tape on elbows, concealed YKK front zip, chest pocket with V-Flap and press stud, hanger loop, side sits and elastic cuffs Features (Trouser): Reinforced bar tacked seam & pressure points, flame retardent reflective tape on knees, elasticated waist band, triple stitched, two sing pockets, money and side tool pockets & one back patch pockets.
4811-D59 50mm lime and silver reflective tape around arms, legs, X on back and two strips across front Chest pockets with riveted metal button down flaps Concealed riveted button front closure Elasticated back waist Side slant pockets and slits Back right patch pocket and ruler pocket All seams triple needle stitched Pockets attached with double needle Stress points bar-tacked STANDARDS EN 20471 Class II – Tape retroreflectivity MATERIAL D59 100% cotton 4/1 sateen 270 g/m² FIT SABS specification Regular
200g/m2 100% D59 flame retardant cotton twill jacket: open neck collar • front yoke panel • concealed zip Monza style chest pocket • two side pockets pants: elasticated back waist • five belt loops • two slanted front pockets • back pocket flame retardant The industry norm on this product is for the pants of the set to be approx. 2 sizes smaller than the jacket. This product will therefore be sold based on the jacket size. For example, if you place an order for a size 34, please be aware that the jacket size will be 34 and the pants size will be 30. Kindly ensure that sizing has been established correctly before placing an order with us as sets cannot be broken up and will always be sold as per the above.
4777D-D59-FA Flame retardant 50mm silver reflective tape Concealed studs to close collar in cold weather Chest pocket with stud flap Concealed YKK brass zip front Elasticated back waist Right back patch pocket Elasticated cuffs All seams triple needle stitched Pockets attached with double needle Stress points bar-tacked STANDARDS SANS 434:2018 – Protective clothing SANS 1423 – Flame retardance ISO EN 6530 – Acid resistant EN 20471 Class II – Tape retroreflectivity MATERIAL D59 SABS approved fabric 100% cotton 4/1 sateen 310 g/m² FIT SABS specification Regular
Sasol Spec Flame Retardant Acid Resistant Jacket Garment type - Jacket Production - South Africa Fabric type - D59 Flame-retardant - Yes Acid-proof - Yes Approved by - SABS, YKK, Proudly South African
Sasol Spec Flame Retardant Acid Resistant Trouser Garment type - Trousers Production - South Africa Fabric type - D59 Flame-retardant - Yes Acid-proof - Yes Approved by - SABS, YKK, Proudly South African
SABS SANS434 Approved Sasol Spec Flame Retardant Acid Resistant Thermal Jacket, Da Gama 1387-4 SABS Local Fabric Garment type - Jacket Production - South Africa Fabric type - D59 Da Gama Certifications & Standards - SANS1387-5, SANS434 Flame-retardant - Yes Acid-proof - Yes Approved by - SABS, YKK, Proudly South African
SABS SANS434 Approved Sasol Spec Flame Retardant Acid Resistant Boilersuit, Da Gama 1387-4 SABS Local Fabric Garment type - Boilersuit Production - South Africa Fabric type - D59 Certifications & Standards - SANS434, SANS1387-6 Flame-retardant - Yes Acid-proof - Yes Approved by - SABS, YKK, Proudly South African
Acid & Flame retardant Conti suit, navy with reflective tape around the middle, arms, and chest. Press studs and zip. Acid & Flame retardant D59 100% Cotton material. Navy body and sleeves. Hi-viz lime green front, hi-viz orange on the back. *Directional High Visibility *Directional Awareness *By adopting this new Directional signaling system, where ACID/GREEN = COME (facing) and ORANGE/RED = GO (unsighted/turned away). Not only do you see the person, but you know that the person wearing acid/green on their chest may be able to see you. *Security – Highly visible people are easy to spot in unauthorised areas. Accidents are also minimised, and people are more cautious and aware. *Productivity – Increased productivity, as all employers are very aware of every movement or lack of movement thereof. *Departmental Supervision – By giving departments differing peripheral coloured Come n GO garments, one can see at a glance who is in the correct department and who is wandering around in other departments. *Savings – Uniform and a high visibility vest in one. *Uses – Municipalities, Mining, Factories, Construction, Manufacturing
Dromex® D59 flame and acid treated thermal winter jacket is designed to protect the user from the hazards of accidental flame contact and acid splashes, reducing injury when working in hazardous environments. This jacket is suitable for use in colder work environments, keeping the user warm whilst the 100% cotton satin weave finish and natural fibre construction makes this garment comfortable and breathable. The Dromex DW-D59FA jacket is approved to the latest SANS 434 specifi- cation and has the SABS permit marking. The D59 drill fabric construction is heavy duty and durable whilst the flame acid garment treatment technology resists the effects of flame contact and acid corrosion offering the user offer essential protection in the workplace. This garment consists of the following: • Collared jacket with internal hanger loop. • High visibility flame retardant reflective tape on arms for enhanced visibility when working in poor lighting environments. • A concealed heavy duty Vizlon zip and plastic press stud closure. • 2 Large waist pockets, 2 bellow chest pockets with flap and metal press stud closures, left chest pocket with Dromex® sidewinder label. Sleeve cuffs have an adjustable strap with 2 position fastening allowance and capped press studs. • Double needle topstitching on shoulder and armhole seams for added durability. • Flame retardant and acid resistant embroidery on arm for garment identification. This garment is suitable for use in general work environments such as engineering, smelting operations, mining, construction, oil and gas, petroleum, maintenance, repairs and welding industries. Acid-resistant fabric is tested to ISO 6530:2005 for protection against liquid chemicals: Two levels of potential performance are assessed by this method of testing to meet with possible requirements for protection against: a) Deposition on the surface of a material at minimal pressure, of spray droplets up to coalescence or occasional small drips. b) Contamination by a single low-volume splash or low- pressure jet, allowing sufficient time to divest the clothing or take other action as necessary to eliminate any hazard to the wearer from chemical retained by the protective garment or in circumstances where pressure is applied to liquid contaminants on the surface of the clothing material, as a result of natural of the wearer (flexing of contaminated areas of clothing at arms, knees, shoulders) and contact with contaminated surfaces (e.g. walking through sprayed foliage). Acid resistance for protective clothing against liquid chemicals for performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals. The acid resistant finish is primarily a liquid proof coating that is not destroyed by the action of acids or other chemicals. It doesn’t allow the cloth to be wetted by the acids and is therefore “acid resistant”: The test chemicals are: - Hydrochloric Acid (HCl) 32% - Sulphuric Acid (H2SO4) 24% - Nitric Acid (NHO3) 65% - Sodium Hydroxide (NaOH) 40% There is no SANS specification for Acid Resistance therefore alternate testing is done in the absence of a national standard. The tests are done to the ISO 6530:2005 and the chemical selection and concentration to the withdrawn DIN32763 standard
Description Dromex® D59 flame and acid treated officers’ style jacket and pants is designed to protect the user from the hazards of accidental flame contact and acid splashes, reducing injury when working in hazardous environments. The Dromex DW-D59FAOR pants and jacket is approved to the latest SANS 434 specification and has the SABS permit marking. The D59 drill fabric construction is heavy duty and durable, whilst the flame acid garment treatment technology resists the effects of flame contact and acid corrosion offering the user offer essential protection in the workplace. The 100% cotton satin weave finish and natural fibre construction makes this garment comfortable and breathable. This garment consists of the following: Jacket features: • Collared jacket with internal hanger loop. • High visibility flame retardant reflective tape on lower arm, upper arm, partial chest, shoulders and rear upper back, for enhanced visibility when working in poor lighting environments. • Concealed brass YKK zip closure. • 2 Open waist pockets and 1 left breast pocket with a Dromex® side- winder label, mitred flap and concealed metal press stud closure. • Side slits for comfortable fit over waist. • Elasticated sleeve cuffs prevent the risk of loose clothing caught in machinery. • Seams are triple needled with topstitching for added durability. • Flame retardant and acid resistant embroidery on arm for garment identification. Pants features: • Flame retardant reflective tape on leg for enhanced visibility when working in poor lighting environments. • A concealed brass zip and with metal nickel button closure at waist. • Two front swing pockets and a rear mitred open pocket with Dromex® sidewinder label. • A tool pocket on the right leg. • A Dromex® sidewinder label on back pocket. • Triple needle topstitching for added durability. • Inner elasticated waist for optimum fit and flexibility with 7 belt loops. This garment is suitable for use in general work environments such as engineering, smelting operations, mining, construction, oil and gas, petroleum, maintenance, repairs and welding industries.